Product ID:INTERGARD HS EPOXY TANK LINING RED, TBL274
MSDS Date:08/14/1991
FSC:8010
NIIN:00N038647
MSDS Number: BRHJH

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-0386
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

0.1 @ 20C.

CAS: 100-51-6

RTECS: DN3150000

Fraction By Weight: 5-10%

SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

2.1 @ 20C.

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

EPOXY RESIN

CAS: 25036-25-3

Fraction By Weight: 5-10%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 15-20%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION, REDNESS,
TEARING AND BLURRED VISION. SKIN: IRRITATING. MAY RESULT IN
DERMATITIS. MAY CAUSE SENSITIZATION OR OTHER ALLERGIC RESPONSES.
INHALATION: MAY CAUSE IRRITATION. INGESTI ON: MAY CAUSE
GASTROINTESTINAL IRRITATION. CHRONIC OVEREXPOSURE TO, AND MISUSE
OF, SOLVENTS HAS BEEN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: LINKED TO PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND
WATER. LAUNDER CLOTHES BEFORE REUSE. INHALATION: REMOVE TO FRESH
AIR. GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGESTION: CALL PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMIT.

Flash Point Method:SCC
Flash Point:107F,42C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SMOTHER FLAMES W/ONE OF EXTING MEDIA.WATER MAY BE USED TO
COOL UNOPENED CNTNRS,BUT MUST NOT BE USED (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS WITH NFPA CLASS II.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
A NIOSH/MSHA APPROVED FILTER RESP TO REMOVE SOLID AIR-BORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT
AREAS, USE NIOSH/MSHA APPRVD RESP I/A/W 29 CFR. 1910.134 TO
(SUPDAT)
Ventilation:PROVIDE SUFF VENT, IN VOL & PATTERN, TO KEEP TLV & LEL OF
HAZ INGS BELOW LIMITS SPECIFIED, & TO REMOVE DECOMP (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: AS AN EXTINGUISHING MEDIA. TAKE CARE TO PREVENT SPREAD
OF BURNING LIQUID WITH WATER. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. RESP PROT: REMOVE A COMBINATION OF PAR
TICULATES AND VAPORS. VENTILATION: PRODUCTS DURING WELDING OR FLAME
CUTTING ON SURFACES COATED WITH THIS PRODUCT.

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.76
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:10(WT)

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:DIRECT HEAT, FLAME OR SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, ALDEHYDES.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.